Licensed and insured Mobile locksmith in North Park, San Diego · Open 8 am to 9 pm, every day

Guide

How Much Does It Cost to Change Locks in San Diego?

Changing a standard deadbolt in San Diego typically costs $100 to $250 with the lock included. A high-security deadbolt runs $250 to $500, and fitting a deadbolt to a door that has none runs $150 to $300. A smart lock supplied and installed costs $250 to $600, and the exact figure is set before work begins.

By the Cabrillo Locksmith team Updated

Lock change and installation

Lock change and installation prices in San Diego
JobTypical price
Deadbolt replaced, lock included: Standard residential grade$100 to $250
Knob or lever lock replaced, lock included: Standard residential grade, existing holes$90 to $220
High-security deadbolt, lock included: Pick- and drill-resistant, restricted keys$250 to $500
New deadbolt on a door that has none: Door and frame drilled, lock included$150 to $300
Lock you supply, fitted: Labor only, per lock$60 to $130

Smart lock installation

Smart lock installation prices in San Diego
JobTypical price
Smart lock you supply, fitted: Existing deadbolt hole in good shape$100 to $200
Smart lock supplied and installed: Depends on the model$250 to $600
Door prep: When the door needs drilling or the bolt needs realigningAdd $50 to $150

Typical San Diego prices between 8 am and 9 pm, travel included unless a service call is listed. The exact price depends on the lock or the vehicle, and you get it before work starts.

Standard deadbolt swap
$100 to $250, lock included
Biggest price factor
The lock you choose, then the state of the door
Lock you bought
$60 to $130 per lock to fit
Cheaper if the lock still works
A rekey: $20 to $50 a lock, one call per visit

What changing a lock costs, job by job

The price of a lock change depends first on which of six jobs you need. The tables above give each range. This one shows which row fits your door.

Your situation The job on the price list What the price includes
The deadbolt is worn but the holes are sound Deadbolt replaced A standard residential-grade lock, fitted
The knob or lever is worn but the holes are sound Knob or lever lock replaced A standard residential-grade knob or lever, fitted
You want a stronger lock and keys nobody can copy High-security deadbolt A pick- and drill-resistant lock with restricted keys, fitted
The door has only a knob latch New deadbolt on a door that has none Drilling the door and frame, the lock and the fitting
You already bought the lock Lock you supply, fitted Labor only, per lock
You want a keypad or app control Smart lock, yours or ours Fitting and setup, plus the lock if we supply it

A plain swap is $100 to $250 for a deadbolt and $90 to $220 for a knob or lever lock, and a high-security deadbolt is $250 to $500. Adding a deadbolt where none exists is $150 to $300, and fitting a lock you bought is $60 to $130. These prices include the trip, so there is no separate service call line. How we fit each one is on our lock change and installation page.

What a lock change bill pays for

Every lock change is three costs: the hardware, the labor and any work on the door. Their share shifts from job to job.

  • Hardware is what sets a high-security deadbolt, or a smart lock we supply, above a standard swap.
  • Labor is all of the bill when you supply the lock.
  • Door work is what separates a $150 to $300 new deadbolt from a swap: the face and edge of the door are bored and the frame is cut for the strike.

What moves the price of a new deadbolt

Three things decide where a deadbolt lands inside its range.

  1. The grade of the lock. ANSI/BHMA grades locks 1, 2 or 3, with Grade 1 the highest, and we suggest Grade 1 or Grade 2 for an outside door. A higher grade costs more to buy and lasts longer on a busy door.
  2. The door. Many houses around North Park, Kensington and Mission Hills still have original doors. Some are thinner than today’s standard, some were cut for a mortise lock, and many have settled so the bolt drags on the strike. Each adds time.
  3. The number of locks. Each lock is priced on its own, so a front and back deadbolt are two lines on the quote.

Near the coast, choose the material before the price. A cheap plated lock that corrodes and has to be replaced again costs more in the end. Which metals survive salt air is set out in our coastal homes lock guide.

Smart lock costs: your lock or ours, plus door prep

A smart lock is priced in two parts: who supplies it, and how much the door needs. Fitting one you bought costs $100 to $200 if the deadbolt hole already in the door is sound. One we supply and install costs $250 to $600, set by the model. Drilling a new hole, or moving the strike so the motor does not stall, adds $50 to $150.

Older doors are where prep costs come from. Fitting smart locks on older doors shows how to measure yours before you buy. Owners of short-term rentals weigh other things, such as remote codes, covered in our guide to vacation rental locks. For the fitting itself, see smart lock installation.

Lock change costs in three San Diego examples

These use only rows from the price tables above.

  • A worn front deadbolt. Swapped into the same holes with a standard lock: $100 to $250.
  • A 1920s door with only a mortise latch. A new deadbolt bored above the old lock, which stays as the latch: $150 to $300.
  • A keypad you bought, on a door that has settled. Fitting is $100 to $200, and realigning the strike adds $50 to $150.

When changing the locks is the wrong spend

Do not buy new locks to fix a problem a cheaper job solves. Two cases stand out.

If the only problem is keys you can no longer account for, rekey instead. Each lock costs $20 to $50, and the visit carries a single $50 to $95 call. Our rekey cost guide breaks that bill down.

If the lock sticks or the latch misses the strike, one part has usually failed. Cleaning and adjusting runs $70 to $140, and realigning the latch and strike runs $70 to $150. Lock repair keeps your keys the same, and we say so when the repair price gets near the price of new hardware.

Getting a fair quote for a lock change

A good quote names the lock and its grade, any door work as its own line, and the price for each lock. To get a tight range on the phone:

  • Say which doors and what is on them now.
  • Measure how thick the door is and its backset, or send a photo of the door edge.
  • Say whether you want to keep one key for the house, so the new lock matches the others.
  • Mention an old mortise lock or a door that sticks.

All figures above are typical ranges for San Diego, and the exact price is fixed before any lock comes off the door. Prices for everything else we do are listed on our locksmith prices page.

Sources

The laws and official pages behind the facts on this page. Each link opens the original document.

FAQ

Quick answers

What does a basic deadbolt swap cost in San Diego?

Replacing a standard residential-grade deadbolt in the existing holes typically costs $100 to $250 with the lock included. Where you land depends on the lock you choose and how well the door and strike line up. You get the exact price before the old lock comes off the door.

Why does a high-security deadbolt cost so much more than a standard one?

The lock itself costs more to make. High-security deadbolts are built to resist picking and drilling, and they use restricted keys that cannot be copied at a kiosk. Fitted, they typically run $250 to $500 with the lock included, against $100 to $250 for an ordinary residential-grade one.

Do old doors make a lock change more expensive?

Often, yes. Doors in older San Diego neighborhoods can be thinner than today's standard, cut for a mortise lock, or settled so the bolt drags on the strike. Each needs extra work before a modern lock fits and runs well. We look at the door first and price that work before starting.

Will buying my own lock make the job cheaper?

It can. Labor to fit a lock you supply is $60 to $130 per lock, so the saving depends on what you paid for the lock. Check the door thickness and backset before you buy. A lock that does not fit the door, or arrives with parts missing, can mean a second visit.

How much more does a smart lock cost than a regular deadbolt?

A smart lock supplied and installed typically costs $250 to $600 by model, against $100 to $250 for a plain deadbolt swap. Fitting a smart lock you bought costs $100 to $200. Either way, a door that needs drilling or realignment adds $50 to $150.

Do I have to change every lock when I replace the front deadbolt?

No. Change only the locks that are worn, weak or missing, and rekey the rest so one key still opens every door. Pick the new lock with the same keyway as the locks that stay. A rekey costs $20 to $50 for each lock, with one service call covering the visit.

Keep reading

More guides

  • Guide

    Locks for salt air

    Which lock materials and finishes hold up to salt air in San Diego's beach neighborhoods, and the simple routine that keeps them turning.

  • Guide

    Car key replacement cost

    Typical San Diego prices for each type of car key, what losing every key adds and how to compare a locksmith's quote with the dealer's.

  • Guide

    Rekey cost

    What a rekey bill is made of in San Diego, why each extra lock costs less, what a typical home pays and how to keep the total down.

Call or get a quote

Tell us what happened

Call and say what happened. For a car, have the year, make and model ready. You get a range on the phone and the exact price before work starts.

(619) 940-1565

  • Open 8 am to 9 pm, every day
  • Licensed and insured
  • Serving North Park and 31 more San Diego neighborhoods and nearby cities, including La Jolla, Tierrasanta, La Mesa, National City and Coronado

Request a quote

Locked out right now? Call instead. The form is for jobs that can wait until we reply.

Call (619) 940-1565 Get a quote