Car locksmith service
Ignition Repair in San Diego
If the steering lock is not the cause and a key will not turn, sticks or feels loose, the cause is usually worn wafers in the ignition lock cylinder. We rebuild the cylinder or fit a new one keyed to your key, where the car is parked. If the key turns and the car will not start, call a mechanic.
Typical price: $150 to $350 to repair the cylinder, $200 to $500 to replace it. Full price table
- Try first
- Turn the steering wheel while you turn the key
- Usual cause
- Worn wafers in the lock cylinder, or a worn key
- Keep your key?
- Usually yes, whether we repair or replace
- Not our job
- Key turns but the engine will not crank or start
Key will not turn in the ignition? Try the steering lock
If the key will not turn, turn the steering wheel while you turn the key. Most cars lock the steering column when the key comes out. If the wheel moved after you parked, the lock binds and holds the ignition with it.
- Put the key fully in.
- Rock the wheel gently left and right, then hold it toward the side that gives a little.
- At the same time, turn the key with light, steady pressure. Do not force it.
- On an automatic, check the shifter is fully in Park and press the brake.
If the wheel moves freely and the key still will not turn, try your spare key. A spare that works means your main key is worn, and a copy made from the good spare gets you back to two keys. If neither works, the cylinder is the problem. Our guide to a key that will not turn in the ignition covers more checks.
How an ignition lock cylinder works and why it wears
The cylinder is a lock, and like any lock it wears from use. Inside is a plug with a row of small, flat, spring-loaded plates called wafers. Without a key, the wafers stick out of the plug and stop it turning. The right key pushes each wafer to exactly the right height so the plug can rotate.
Every turn rubs the key against the wafers. Over years, both wear down. A key that once lined up every wafer now leaves one or two a little off, so you start jiggling, then the key stops turning at all. A heavy keychain swinging from the key adds strain on every drive.
Signs of a worn ignition and what they usually mean
- Key will not turn at all: steering lock, worn key, or wafers stuck.
- Key turns only after jiggling: wafers or key worn, getting worse.
- Key stuck in the ignition: shifter not in Park, steering lock, or a wafer catching the key.
- Key turns but feels loose or spins: worn or broken parts inside the cylinder.
- Key broke off in the ignition: do not try to start the car with the stub. See broken key extraction.
Repair or replace the ignition cylinder
We repair when the cylinder body is sound and replace it when it is cracked, seized or badly worn. Either way, the aim is to keep your current key.
| Repair (rebuild) | Replace | |
|---|---|---|
| What we do | Take the cylinder out, swap worn wafers and springs for new ones that suit your key | Fit a new cylinder and set its wafers to match your key |
| When it fits | Worn wafers, sticky action, body undamaged | Broken or cracked housing, a cylinder that spins freely, damage from a forced entry |
| Your key | Stays the same | Stays the same |
If your key is worn as well, a new cylinder will still feel rough with it. In that case we cut a fresh key to the car’s code through car key replacement, and the new key and cylinder start out matched.
When an ignition problem needs a mechanic, not a locksmith
The lock cylinder is locksmith work. The electrical ignition switch behind it usually is not. The cylinder only takes the key and turns. The switch then sends power to the car’s systems and the starter.
Call a mechanic or auto electrician instead of us when:
- the key turns normally but the engine does not crank or start
- the dash lights flicker or cut out when you touch the key
- the car stalls while you are driving
Those point to the switch, the battery, the starter or the wiring. Cars with push-button start have no ignition cylinder at all, so a no-start there is usually a fob or electrical question. For the car work we do take on, from lockouts to new keys, see our full list of car locksmith services.
What changes the price of ignition repair
How the cylinder comes out and whether it can be rebuilt. Some cylinders release with the key turned. Others mean taking off steering column covers. The table below has the ranges. We do this work where the car is parked, which helps when a car will not move at all, whether that is in a driveway in Normal Heights or a parking structure Downtown.
What ignition repair costs in San Diego
| Job | Typical price |
|---|---|
| Stuck or broken key removed from the ignition: Cylinder undamaged | $90 to $200 |
| Ignition cylinder repaired: Worn wafers replaced, same key kept | $150 to $350 |
| Ignition cylinder replaced and keyed to your key: Depends on make and model | $200 to $500 |
Typical San Diego prices between 8 am and 9 pm, travel included unless a service call is listed. The exact price depends on the lock or the vehicle, and you get it before work starts.
Cabrillo Locksmith charges the same prices every day of the week. See prices for every locksmith service
FAQ
Ignition repair questions
Why will my key not turn in the ignition?
The most common reason is the steering lock, which binds when the wheel is turned after the engine is off. Next is a worn key or worn wafers inside the cylinder, so the key no longer lines them up. On automatics, a shifter that is not fully in Park can also stop the key.
My key is stuck in the ignition. What should I do?
Check the shifter is fully in Park, then turn the wheel gently while you wiggle the key back to the off position. Do not pull hard or use pliers, because a snapped key makes the job bigger. If it still will not come out, we can remove it and check the cylinder.
Can you repair the ignition and keep my old key?
Usually. When we rebuild the cylinder we fit new wafers to suit your key, and when we replace it we key the new cylinder to match. Your door key and ignition key stay the same. If your key is badly worn itself, we may suggest a fresh key cut to the car's code.
What does it mean if the key turns but feels loose?
A key that spins with little resistance, or turns past where it should, points to worn or broken parts inside the cylinder. The car may still start for now. It is worth having it looked at early, because a cylinder that fails completely can leave the car stuck in the off or on position.
Is a bad ignition switch a locksmith job?
Usually not. The ignition switch is the electrical part behind the lock cylinder. Signs like dash lights cutting out, stalling while driving, or no crank with a key that turns normally point to the switch, the battery or the starter. A mechanic or auto electrician is the right call for those.
How much does ignition repair cost?
Removing a stuck or broken key is $90 to $200. Repairing the cylinder with new wafers is $150 to $350. Replacing the cylinder and keying it to your key is $200 to $500, depending on the make and model. You get a phone range first and the exact price before we start.
Related services
Jobs that often go with ignition repair
Call or get a quote
Tell us what happened
Call and say what happened. For a car, have the year, make and model ready. You get a range on the phone and the exact price before work starts.
(619) 940-1565- Open 8 am to 9 pm, every day
- Licensed and insured
- Serving North Park and 31 more San Diego neighborhoods and nearby cities, including La Jolla, Tierrasanta, La Mesa, National City and Coronado