- Best fit for most rentals
- Keypad deadbolt with user codes and a key cylinder
- Codes
- One per stay, deleted at checkout, separate codes for cleaners and owner
- City license
- Required for stays of less than one month in the City of San Diego
- Fitting a lock you bought
- $100 to $200 labor, with door prep extra at $50 to $150
The best lock for most vacation rentals: a keypad deadbolt with a key override
Fit a keypad deadbolt that holds several user codes and has a key cylinder under the keypad. Each guest gets a code of their own, you delete it when they leave, and the key is your way in if the electronics fail.
That beats the two older habits. A key under the mat or in a planter is found by whoever looks, and guests can copy it. A lock box is better, but most have one combination that every guest learns, and resetting it after each stay is the job that slips first. In Mission Beach and Ocean Beach, where many homes take guests by the night, that adds up to a lot of people who know how to open the door.
Vacation rental entry options compared
Four common ways to let guests in, and how each one behaves on a busy turnover day.
| Option | Changing access between guests | When batteries or the internet fail | Suits |
|---|---|---|---|
| Keys handed over or left in a lock box | Collect every key, or reset the box combination by hand. Copies can only be cancelled by a rekey | Nothing electronic to fail. A lost key means a rekey | Long stays, an owner who lives close by |
| Mechanical push-button lock | Code changed by hand at the lock, often with a tool. Most hold one code at a time | No batteries, so nothing goes flat | Side gates, storage, units that rarely turn over |
| Battery keypad deadbolt, codes set at the door | Codes added and deleted on the keypad using a programming code, so someone must be at the door | The key cylinder, or emergency power contacts on some models | An owner or manager near enough to visit between stays |
| Connected smart lock, codes set from a phone | Codes issued and removed in the app, and some apps let a code start and end on set dates | Codes already stored on the lock usually keep working. New codes cannot be sent until the connection is back | Owners who manage from elsewhere, back-to-back bookings |
Whether a lock keeps its codes on the lock or in the cloud decides what happens when the router drops, so check the manual for your model.
Managing guest, cleaner and owner codes on a rental
A code is a key that costs nothing to cancel, so cancel it.
- One code per booking. Make it for that stay and delete it at checkout.
- A separate cleaner code. The guest code can then go the moment the guest leaves. Change it when the cleaning company changes.
- An owner code that no guest or cleaner ever learns.
- No code that runs all year. Long-lived codes get written down and passed on. Replace them every few months.
- Nothing guessable. Skip the house number, 1234 and the last digits of your phone number.
Keeping a way into the rental when the keypad dies
Batteries run out, and they like to do it on a changeover. Most locks warn first, with a light on the keypad or an alert in the app, so change them at the first warning and keep spares where the cleaner can reach them, not inside the locked unit.
A dead keypad simply goes quiet: no backlight, no beep when a button is pressed, and the bolt does not move. If the lock has a cylinder, the backup key turns the bolt as usual. Keyless models without one often have outside contacts for emergency power: depending on the model, you touch a 9-volt battery or plug in a USB-C power bank, then enter a code.
Decide who holds the backup key before you need it: a manager or neighbor a short drive away, never a hiding place by the door.
Salt air and door fit: why rental locks fail early near the beach
Hardware a few blocks from the ocean corrodes sooner, and a keypad’s electronics and battery contacts suffer first. Pick a lock whose maker states a water and dust rating, favor a door under a porch roof, and read our guide to locks for coastal homes for materials and upkeep.
The door has to be right before the lock goes on. A motorized bolt has far less force than a hand, so a bolt that rubs the strike stalls the motor, drains the batteries and reports jams. With the door shut, throw the bolt with the thumbturn. Any push or lift you need to give the door is a fault to fix first. Through our smart lock installation service we check the door alignment before anything else, then set the codes with you and test the lock with the door shut. Older cottage doors bring their own sizes and quirks, covered in smart locks on older doors.
Rekeying a rental when you take it over or change managers
Rekey every keyed lock when you buy a rental, take over managing one, or part ways with a manager or cleaning company. Nobody can tell you how many copies the last people made. A lock rekey swaps the pins so old keys stop turning, and the cylinder under the keypad belongs on the list too.
Some doors should stay on a key no guest ever gets: the owner’s closet, a storage room, a garage with tools, the utility closet. Put those on an owner key of their own. Rekeying is priced as one trip, $50 to $95, plus $20 to $50 for every cylinder. For a house with 3 to 5 locks set to one key, expect $110 to $345 all in. Delete every code the old manager knew on the same day.
San Diego short-term rental licenses, HOA rules and lock costs
The City of San Diego requires a license for every short-term residential occupancy, meaning a home or part of one rented for less than one month. The city says operating without one has been unlawful since May 1, 2023. The Office of the City Treasurer runs the program and publishes its current requirements, including license tiers and host rules, so check them with the city before you list.
A condo association, an HOA or a lease can limit short-term renting and changes to the front door. Read the CC&Rs or the lease, and ask before a keypad goes on.
On cost, the labor to fit a smart lock you already own is $100 to $200, as long as the old deadbolt hole is in good shape. Having us supply the lock as well comes to $250 to $600, set mostly by the model you choose. Drilling or realigning the door is a separate line of $50 to $150. Our lock change cost guide shows how those bills are built.
Sources
The laws and official pages behind the facts on this page. Each link opens the original document.
- Short-Term Residential Occupancy (STRO) program and license requirement, City of San Diego, Office of the City Treasurer