Car locksmith service
Car Key Duplication and Spare Keys in San Diego
If one key still works, a spare is a copy job, not a replacement, and it costs less. We cut the blade from your key, then either clone its chip or add the new key to the car's list of allowed keys. A plain metal key is a simple cut. The price is fixed before any cutting begins.
Typical price: $100 to $450 for most chip, remote and smart keys. A plain metal copy is $40 to $90. Full price table
- What you need
- One working key, photo ID and the registration
- Two ways to copy a chip
- Clone the chip, or add the new key to the car
- Hardware store copy?
- Fine for plain metal keys, hit and miss for chip keys
- Why now
- A copy costs less than starting from no key at all
Why a spare car key costs less than a lost one
With a working key in hand, the hard part is already done. The blade can be traced from your key and the car is already set up to recognize a key, so nothing has to be built from nothing.
Lose that last key and the job changes. The key has to be cut from the car’s code and the car switched into a state where it will learn a key with nothing to compare it to, which adds $50 to $200. Our checklist for lost car keys with no spare shows what that day looks like. A spare made now keeps you off that page.
It is also the usual reason people call: a second driver in the house, a teenager getting a license, or a single key that has started to look worn. Some people want a spare to take to the beach instead of their only fob, and our guide on where to keep a car key while you surf weighs up the options.
Cloned chip or added key: two ways to copy a car key
Most chip keys can be copied one of two ways, and the right one depends on the car and what you want the spare to do.
| Cloned chip key | Key added to the car | |
|---|---|---|
| How it works | The data on your key’s chip is copied onto a new chip | The car learns the new key as a separate key of its own |
| Does the car need connecting? | Usually not | Yes, through the port under the dash |
| Uses up one of the car’s key slots? | No: the car sees it as your original | Yes |
| Works for smart keys? | Rarely | Yes |
| Remote buttons? | No, chip only | Yes, on a remote or smart key |
Not every chip can be cloned. Some transponders are built so they can only be programmed, and you cannot tell which kind you have by looking at the key. That is why we ask for the year, make and model first.
When a hardware store car key copy is good enough
For a plain metal key, a hardware store or a kiosk is a sensible, cheap choice. For anything with a chip, a remote or a laser-cut blade, the answer is less certain.
- Plain metal key, no chip: Copied almost anywhere. Most cars before the late 1990s.
- Chip key: Some kiosks can clone selected chips, depending on the make, model and year. Many stores cannot. A cut blade with no chip copied will open the door but will not start the engine.
- Laser-cut key: The groove milled down the side of the blade needs a key machine that many hardware stores do not have.
- Remote-head key: A clone copies the chip only. The buttons need programming to the car.
- Smart key: Not copied at a kiosk. It is almost always programmed to the car.
If you try a store first and the copy turns but the engine will not run, keep the key. The blade is often fine, and only the chip needs attention.
How we copy a car key
The work happens where the car is parked, in this order:
- You tell us the car and the key. Year, make and model, and whether you turn a key or press a button. That gives you a range on the phone.
- We check ID and the registration. California law requires a work order with your ID and the car’s details whenever a locksmith makes a car key, copies included.
- We cut the blade. From your key if it is in good shape, or to the factory code if it is worn.
- We clone the chip or add the key. Whichever suits the car and the spare you asked for.
- We test both keys. Doors, ignition and, on remote and smart keys, every button.
If you also need a lost fob erased, or the buttons on an existing remote have stopped pairing, that is key fob programming.
Cars that limit how many keys they hold
Many immobilizers can only store a set number of keys. Owner’s and service manuals for some models put the cap at eight. Once the car is full, an added key means removing one first.
A cloned key does not use a slot, because the car reads it as the original. That makes cloning useful on a car that is already near its limit. The catch: the clone and the original share one code. If the original is ever lost and erased from the car, the clone stops starting it too.
Some older cars let an owner with two working keys add a third by following steps in the owner’s manual. If yours has that procedure, you only need the blade cut on a matching chip key.
What to bring for a spare car key, and dealer-only cars
Have these ready:
- Every key and fob you use, not only the one being copied.
- Photo ID and the registration.
- The year, make and model, or a photo of the VIN plate through the windshield.
A few of the newest models, and some European cars, can only get new keys from the dealer. Give us the car’s details when you call and we say straight away if it is one of those. If every key is already gone, you need car key replacement instead, and the car key replacement cost guide explains how those prices are built. Everything else we do for cars is gathered on one car locksmith page.
We copy keys in driveways and apartment garages across the area, from the bungalow courts of University Heights to the 1950s tract streets of Clairemont.
What a spare car key costs in San Diego
| Job | Typical price |
|---|---|
| Plain metal key copied, no chip: Cut from your working key | $40 to $90 |
| Transponder (chip) key copied and programmed: Most cars from the late 1990s on | $100 to $250 |
| Remote-head or flip key copied and programmed: Key and remote in one piece | $125 to $280 |
| Spare smart key for push-button start: Proximity fob added to the car | $180 to $450 |
Typical San Diego prices between 8 am and 9 pm, travel included unless a service call is listed. The exact price depends on the lock or the vehicle, and you get it before work starts.
Cabrillo Locksmith charges the same prices every day of the week. See prices for every locksmith service
Sources
The laws and official pages behind the facts on this page. Each link opens the original document.
- Business and Professions Code section 6980.55: locksmith work orders, California Legislative Information
FAQ
Spare car key questions
How much does it cost to copy a car key?
It depends on the key. A plain metal key copied from yours is $40 to $90 with the trip to you included. A chip key is $100 to $250, a remote-head or flip key is $125 to $280, and a spare push-button smart key is $180 to $450. The exact price comes before any cutting.
Why won't my copied key start the car?
The blade was cut but the chip was not copied or registered. The key turns the lock and the ignition, then the immobilizer refuses to let the engine run because it does not recognize the chip. The fix is to clone the original chip onto the copy or program it to the car.
Can a spare key be made from a copy instead of the original?
Usually, if the copy works properly. Copying a worn key passes its wear on to the spare, though, so if either key feels loose or catches in the lock we cut the spare to the factory code instead. For the chip, what matters is that the key starts the car today.
Does a cloned key work the remote buttons?
No. Cloning copies the engine-start chip and nothing else. The lock, unlock and trunk buttons are paired with the car separately. If you want working buttons on the spare, it has to be a remote key programmed to the car, which costs more than a cloned chip key.
Can I get a spare smart key without going to the dealer?
For most makes, yes. A smart key usually cannot be cloned, so the spare is programmed to the car as an extra key, with the car connected to a programmer. Some newer and European models only accept keys through the dealer. Call with the year, make and model and you will have the answer on that call.
Should I bring all my keys when getting a spare made?
Yes. On some cars, adding a key means clearing the stored list and registering every key again. Any key that is not there at the time can stop starting the car. Bring every key and fob you use, including a valet key, so each one is tested before we leave.
Related services
Jobs that often go with spare car keys
Call or get a quote
Tell us what happened
Call and say what happened. For a car, have the year, make and model ready. You get a range on the phone and the exact price before work starts.
(619) 940-1565- Open 8 am to 9 pm, every day
- Licensed and insured
- Serving North Park and 31 more San Diego neighborhoods and nearby cities, including La Jolla, Tierrasanta, La Mesa, National City and Coronado