- Most common cause
- The steering lock, engaged when the wheel moved after the engine was off
- First thing to try
- Turn the wheel gently both ways while turning the key
- Never
- Force the key, hit it or spray oil into the ignition
- Cylinder repair
- $150 to $350 to repair, $200 to $500 to replace
Five checks when your car key won’t turn
Start with the steering lock. It is the most common reason a key will not turn, and it costs nothing to fix. These checks apply to cars you start with a turning key. If your car has a start button, see key fob not working instead.
- Work the wheel and the key together. Rock the wheel gently left and right, without forcing it. One direction usually has a little give. Hold it that way and turn the key.
- Check the gear selector is fully in Park. Many automatic cars will not let the key turn unless the selector is in Park, and some allow Neutral as well. Press the brake and move the selector firmly into Park, then try again.
- Try the spare key. If the spare turns and your usual key does not, the usual key is worn. Look along its blade: rounded cuts or a slight bend are the giveaway.
- Look into the keyway. Shine a phone light into the slot. Lint and grit from a pocket or bag can lodge inside. A few short bursts of compressed air through a straw nozzle can clear it. Wear glasses, and do not empty the whole can into the lock.
- Check the battery. Some cars use an electronic steering lock or an electronic shift lock that needs power to release. If the dash is dim or dark, charge or jump-start the battery and try once more. Some cars also have a manual shift lock release: your owner’s manual shows where it is.
What not to do with a key stuck in the ignition
Do not force the key. Each of these turns a free fix into a repair bill.
- Forcing it or using pliers on the head. A worn key can snap in the ignition, which then needs broken key extraction. Forcing a locked steering wheel hard can also damage the lock pin in the column.
- Hitting the key or the column. It does nothing to the parts that are actually stuck, and it can bend the key.
- Spraying oil or WD-40 into the slot. Oil left in an ignition gathers dust, and the grime it builds up can stop the key turning for good. If lubrication is needed, use a dry lubricant made for locks.
Why a car key stops turning in the ignition
There are four usual reasons, and three of them come down to wear or load on a small metal part.
- The steering lock is under load. The wheel was turned after the engine was off, or the front wheels are pressing against a curb, so the lock pin is jammed.
- The key is worn. Years of use round off the cuts until they no longer lift the wafers inside the ignition to the right height.
- The wafers are worn. The same wear happens inside the cylinder. Eventually even a new key will not line the wafers up.
- The car has no power. On cars with electronic steering or shift locks, a flat battery leaves them locked.
Worn ignition cylinder: repair or replace
If the steering lock is free, the car is in Park, the battery is good and the spare key also will not turn, the ignition cylinder is the likely problem. It usually gives warning first: the key needs a jiggle, then sticks more often, then stops.
There are two ways to fix it, and we tell you which one your car needs before starting:
| Repair | What it involves | Typical price |
|---|---|---|
| Cylinder repaired | The cylinder comes out, the worn wafers are replaced and it goes back in. You keep your key | $150 to $350 |
| Cylinder replaced | A new cylinder is fitted and keyed to your existing key | $200 to $500 |
If the key snapped or is stuck in the cylinder, removing it costs $90 to $200. The full details are on our ignition repair page.
Some faults are not the cylinder. A failed electronic steering lock module, for example, is a job for a mechanic or the dealer, and we will say so on the phone.
Getting a stuck ignition fixed in San Diego
A car whose key will not turn usually cannot be driven anywhere, so our ignition repair is done where the car is parked: a driveway in University Heights, a curbside spot or a building’s parking level.
- Hours. We take ignition jobs from 8 am until 9 pm, seven days a week, never overnight.
- ID. If the fix includes cutting a new key, California law requires us to record your ID on a signed work order. Have your photo ID and the registration ready.
- Price. The call gives you a range, and the figure is fixed at the car before the cylinder comes out. It does not rise at weekends.
How to keep your ignition key turning smoothly
Take the strain off the steering lock, the key and the cylinder, and replace worn parts before they fail.
- Straighten the wheel before you switch off, and avoid turning it once the engine is off.
- Replace a worn key by having it cut to the key code, not copied, so the new one is not just as worn. See car key replacement. Then have a spare car key copied from the new key, never from the worn one.
- Deal with a sticky key early. A cylinder repaired while it still works costs less than one that has to be replaced after it fails.
Sources
The laws and official pages behind the facts on this page. Each link opens the original document.
- Business and Professions Code section 6980.55: locksmith work orders, California Legislative Information