| Job | Typical price |
|---|---|
| Home safe opened: Lost combination, lost key or dead keypad | $150 to $450 |
| Safe drilled open and repaired: When it cannot be opened any other way | $300 to $800 |
| Electronic safe lock or keypad replaced: Lock included | $150 to $400 |
| Combination changed: Mechanical dial or electronic lock | $80 to $175 |
Typical San Diego prices between 8 am and 9 pm, travel included unless a service call is listed. The exact price depends on the lock or the vehicle, and you get it before work starts.
- Home safe opened
- $150 to $450, no drilling
- Drilled open and repaired
- $300 to $800, last resort
- Biggest price factor
- The lock type, then whether it opens without drilling
- Have ready
- Make, model, lock type and proof the safe is yours
What decides the price of opening a safe
Three things set the price: the kind of lock, how well the safe is built, and whether it opens without drilling. The table above lists the ranges. Where a job lands inside them comes down to the lock first.
| Lock type | What usually goes wrong | Where the cost tends to sit |
|---|---|---|
| Electronic keypad | Flat battery, a keypad that stops reading presses, failed wiring to the lock | Often the low end, because power or a new keypad can open it |
| Key lock or key override | The key is lost | Usually worked around through the lock, without drilling |
| Mechanical dial | The combination is lost | Sometimes opened without damage. If not, drilled and repaired |
How each method works is explained on our safe opening page. This guide covers what you pay.
Why a dead keypad usually costs less than a lost combination
A dead keypad is often the cheap case because the lock behind it still works. The fault sits in the power or the keypad, so a fresh battery or a replacement keypad gets the door open and the safe stays whole.
A lost combination on a well-built dial safe is the expensive case. A dial lock can sometimes be opened without damage, but not every time. When that fails, the only way in is a single small hole drilled at an exact spot, and the lock is opened through it. The hole is then sealed and the lock fixed or swapped. A safe made to resist burglary tools resists the drill too, which is why this job runs $300 to $800.
One more thing raises the bill: forcing the door first. Many safes carry a relocker, a hidden spring-loaded device that drops an extra bolt into place if someone attacks the lock. After it trips, opening the safe takes more work.
Safe jobs and the price row each one falls under
Most calls fit one of four rows in the table above. This shows which situation usually leads where.
| Your situation | The row that usually applies |
|---|---|
| Dead keypad, lost key or lost combination, opened without damage | Home safe opened |
| Nothing else works and the safe has to be drilled | Safe drilled open and repaired |
| A keypad that keeps failing, or a new electronic lock wanted | Electronic safe lock or keypad replaced |
| Someone who knew the code should no longer have it | Combination changed |
Most electronic locks let the owner set a new code using the old one and the manual, at no cost. A mechanical dial needs the safe open and a change key, and one slip can lock you out, so that is where paying a locksmith makes sense.
What to tell a locksmith when you call about a locked safe
A useful quote needs four facts. Without them, any price is a guess.
- Make and model. From the manual, the receipt or a label on the safe.
- Lock type. Dial, keypad, key, or a keypad with a key override.
- What happened. No lights, beeping, a code accepted but a handle that will not turn, or a key that is gone.
- Whose safe it is. Yours, a business’s or an estate’s.
Proof of ownership matters as much as the price. We ask for photo ID and one document tying you to the safe: a purchase receipt, a manual showing its serial number, or ID with the address where it is kept. A business safe needs the owner present, or a manager the owner has authorized. An inherited safe needs the estate papers that give you authority over it.
Business and high-security safes: when a specialist sets the price
Our work covers safes in homes and small businesses. Big commercial units and high-security safes can be a job for a safe specialist, and you will hear that during the first call instead of a figure we cannot stand behind. For the doors, rekeys and other locks of a shop or office, see commercial locksmith.
Before anyone drills your safe, confirm their California locksmith license. Our guide to looking up a locksmith’s license in California walks through the state search.
How to keep the cost of a safe opening down
The cheapest fix is often one you can try yourself.
- Put in a new battery, the kind your manual specifies, then enter the code once, slowly.
- Wait out a lockout after several wrong codes. The keypad wakes up on its own.
- Do not pry or hammer. A fired relocker makes the job harder.
- Compare the bill with a new safe. Replacing a light fire box can be cheaper than paying to open it.
Read every figure here as a typical San Diego range rather than a fixed list. The call narrows it, and you hear the exact price, and agree to it, before a tool touches the safe. What we charge for other jobs is listed on our locksmith prices page.